| 平整度 | ≤3.0mm | 基层强度 | C25以上 |
| 耐酸碱性 | 10（56天没有变化） | 耐磨性 | 防静电薄涂地坪≤0.02（750g/500r） |
| 耐冲压性 | 50kg 通过 | 铅笔硬度 | ≥2HD |
普通环氧防静电地坪
适用范围：
电子、微电子、通讯、计算机、精密仪器、纺织、印刷、粉体、化学、有机溶剂、瓦斯等一切需要抗静电的工厂的墙面、地坪及储油罐。
性能特点：
- 抗静电效果优良持久.
- 防潮，耐磨，不受时间、温度、湿度等影响防尘.
- 面光洁平整.
施工工艺：
①防水处理： 一楼地面需已做好防水处理；
②素地处理： 依素地状况做好打磨、修补、除尘；
③防静电底漆：采用渗透性及附着力特强防静电环氧底漆滚涂一道，增强表面附着力；
④环静电中涂：防静电中涂将环氧树脂加入适量的石英砂，用镘刀将其均匀涂布一至二道；
⑤铜箔铺设： 导电铜箔采用井型铺设，有效排除累积之静电，并做接地处理；
⑥防静电批土：防静电批土依实际需要施工数道，要求达到平整无孔洞，无批刀印及砂磨印为准；
⑦防静电面漆：防静电自流平面漆一道，其体积/表面电阻平均系数值1X10^6～1X10^9Ω，完工后整体地面光亮洁净，颜色均一，无空鼓；
⑧施工完成： 24小时后方可上人，72小时后方可重压。（25℃为准，低温时开放时间需适度延长）
Scope of application:
Electronics, microelectronics, communications, computers, precision instruments, textiles, printing, powder, chemicals, organic solvents, gas plant and all necessary anti-static walls, floor and storage tanks.
Features:
Good and lasting anti-static effect.
Moisture, wear, free time, temperature, humidity, dust and other effects.
Smooth flat surface.
Construction Technology:
① waterproofing treatment: on the first floor on the ground need to have well water treatment;
② Su deal: According to Su to do a good job grinding condition, repair, dust;
③ Anti-static primer: Using an exceptionally strong permeability and adhesion roll coating an anti-static epoxy primer to enhance the surface adhesion;
④ ring electrostatic in Tu: anti-static coating to the epoxy resin by adding an appropriate amount of quartz sand, using trowel its uniform coating 1-2;
⑤ Copper laying: conductive copper foil using well-type roll, effectively rule out the accumulation of static electricity, and do ground handling;
⑥ Anti-static batch territories: anti-static batch number of territories in accordance with the actual needs of the construction Road, required to achieve smooth no hole, no batch knife and sanding India India prevail;
⑦ anti-static finish: Anti-static self-leveling finish one, its volume / surface resistance of the average coefficient 1X10 ^ 6 ~ 1X10 ^ 9Ω, after the completion of the overall clean and bright surface, color uniform, no hollowing;
⑧ Construction complete: 24 hours before the Exalted be the weight after 72 hours. (25 ℃ prevail at low temperature required to suitably extend the opening hours)