Products of other enterprises
Description
Grafted polyethylene (PE-G-MAH)
1). Introduction of PE-G-MAH
Table 1 grafted polyethylene simple performance
2), the main purpose
NG1001: To improve the polarity of PE, and improving the compatibility of polar materials. It is used for the toughening of nylon, PC, as well as the compatibility agent of PA / PE, PC / PBT and PE / PE ,etc (such alloy plastics). When we put a small quantity in the reprocessed nylon, it could significantly enhance its mechanical properties. If NG1001 mixed with PE, it will improve the property of printing and spray paint of PE.
NG1201: It has high fluidity and good dispersity . It can be Used as the compatilizer of the reinforced PE & the mineral filled PE . Meanwhile It has the effect of toughening and compatibility to some alloy plastics .And when put the NG1201 in the PC/PBT & enhanced PC/PBT ,It will increase their toughness, and improve their appearance and the processing performance. And it also can be used as a plasticizer to mix with PA and PBT system, and improve the PA & PBT's toughness, but not affect their dispersity.
NG1102: It is used for the toughening of nylon, PC, as well as the compatibility agent for alloy plastics such as PA / PE, PC / PE and PBT / PE ,etc.
3), packaging, storage and transportation
25 KGS is packed in a kraft bag. In the process of transport and storage ,Please do not to be exposed in the heavy shine and rain, In the case of wet, it can be used after the drying more than 90 ℃ for 4 hours.
1). Introduction of PE-G-MAH
Table 1 grafted polyethylene simple performance
unit | NG1001 | NG1201 | NG1102 | |
Density | g/ml | 0.96 | 0.93 | 0.92 |
Melt index | g/10min | 1.0 | >20 | 1.0 |
Ingredient | — | HDPE | LLDPE | LDPE |
Graft rate | 0.9 | 0.9 | 0.9 |
NG1001: To improve the polarity of PE, and improving the compatibility of polar materials. It is used for the toughening of nylon, PC, as well as the compatibility agent of PA / PE, PC / PBT and PE / PE ,etc (such alloy plastics). When we put a small quantity in the reprocessed nylon, it could significantly enhance its mechanical properties. If NG1001 mixed with PE, it will improve the property of printing and spray paint of PE.
NG1201: It has high fluidity and good dispersity . It can be Used as the compatilizer of the reinforced PE & the mineral filled PE . Meanwhile It has the effect of toughening and compatibility to some alloy plastics .And when put the NG1201 in the PC/PBT & enhanced PC/PBT ,It will increase their toughness, and improve their appearance and the processing performance. And it also can be used as a plasticizer to mix with PA and PBT system, and improve the PA & PBT's toughness, but not affect their dispersity.
NG1102: It is used for the toughening of nylon, PC, as well as the compatibility agent for alloy plastics such as PA / PE, PC / PE and PBT / PE ,etc.
3), packaging, storage and transportation
25 KGS is packed in a kraft bag. In the process of transport and storage ,Please do not to be exposed in the heavy shine and rain, In the case of wet, it can be used after the drying more than 90 ℃ for 4 hours.
Contact the seller
·PE-G-MAH