Hammer Crusher

Frequently used hammer crushers are drying hammer crushers and ring hammer crushers. Xuanshi is a professional stone crushing machinery manufacturer in China. We primarily produce ring hammer crushers. Our hammer crushers are widely to crush medium-hard friable materials (water ratio ≤ 15%, compressive strength ≤100 MPa). Xuanshi hammer crushers are mainly used to crush coal, salt, chalk, gypsum, brick and limestone. Besides, our stone crushers can also be used to break fiber structure, broken wood, paper, as well as asbestos and cement waste. Currently our hammer crushers are increasingly used in the area of mining, cement, coal, metallurgy, building materials, highway and so on.

The motor drives the rotors to rotate quickly in the crushing chamber. Materials enter the crusher through the feed port, and then they are being stricken, cut and ground into smaller particles by a hammer. There is a sieve plate under the rotor, so the materials whose size is smaller than the sieve size will be sieved out and others will be left to be further stricken and ground until they can be sieved out. The size of final product can be adjusted by changing the sieve plate. The gap between the rotor and the sieve plate can also be adjusted according to different requirement.

Model and size	Feeding size (mm)	Discharging size (mm)	Capacity (t/h)	Motor Pole	Powder (kw)	Weight (t)	Overall Dimension (mm)
PCΦ400×300	≤200	≤25	5-10	4	11	0.8	900×670×860
PCΦ600×400	≤250	≤30	10-22	4	22	2.26	1200×1050×1200
PCΦ800×600	≤250	≤35	18-40	4	55	4.8	1310×1180×1310
PCΦ1000×800	≤350	≤35	25-50	4	75	5.9	1600×1390×1575
PCΦ1000×1000	≤350	≤35	30-55	6	132	8	1800×1590×1775
PCΦ1250×1250	≤350	≤35	35-65	6	180	14	2060×1600×1890
PCΦ1400×1400	≤350	≤35	50-100	6	280	32	2365×1870×2220
PCΦ1600×1600	≤350	≤35	100-150	8	480	37.5	3050×2850×2800

Note:This specification is just reference,any changes are subject to the hammer crusher products.